Crossflow XF75
Crossflow XF75 - Image 2
Crossflow XF75 - Image 3
Crossflow XF75 - Image 4

Crossflow XF75

XF75 packs are available with a 10° angle for easy installation in package crossflow towers used in HVAC and light industrial applications.

Specially designed for today’s higher-capacity cooling towers where high water loading and air velocities are standard, they replace OEM hanging sheets with solid modules of rigid PVC, or HPVC, film pack. Once installed, this system forms a long-term, trouble-free replacement for the OEM material, and since it is bottom supported, XF75 allows for the basin to be easily cleaned out and maintained. This maintains the cooling performance where fitted sheets fail.

XF75 is also available with integral drift eliminators or inlet louvers, combining drift loss and splash-out reduction with the standard pack’s high thermal performance.

Key Benefits:

  • Available in material meeting CTI Standard 136
  • Engineered herringbone surface for even water distribution
  • Bottom-supported by XF Support System – Non corrosive
  • TSS less than 200 PPM with good microbiological control (less than 50 PPM where microbiological control is poor)
  • Make-up from uncontaminated sources
  • Good scale control
  • Minimal to moderate airborne dust
  • Oil or grease potential needs to be maintained at less than 7.5 PPM and water treatment with appropriate surfactant use
  • Buy and install yourself or FlowMatrix installation available

Product Specifications

Height1220mm (4ft) 1830mm (6ft) – 2440mm (8ft)
Width and Depth305mm x 610mm
Sheet Spacing19mm
Thickness0.25mm
MaterialPVC

Related Cooling Tower Products