Crossflow XF75ID

Crossflow XF75ID

With integral drift eliminator

XF75ID packs are available with a 10° angle for easy installation in package crossflow towers used in HVAC and light industrial applications.

Specially designed for today’s higher-capacity cooling towers where high water loading and air velocities are standard, they replace OEM hanging sheets with solid modules of rigid PVC, or HPVC, film pack.

Once installed, this system forms a long-term, trouble-free replacement for the OEM material, and since it is bottom supported, XF75 allows for the basin to be easily cleaned out and maintained.

Key Benefits:

  • Available in material meeting CTI Standard 136
  • Engineered herringbone surface for even water distribution
  • Bottom-supported by Brentwood’s XF Support System
  • TSS less than 200 PPM with good microbiological control (less than 50 PPM where microbiological control is poor)
  • Make-up from uncontaminated sources
  • Good scale control
  • Minimal to moderate airborne dust
  • Oil or grease potential needs to be maintained at less than 7.5 PPM and water treatment with appropriate surfactant use
  • Buy and install yourself or FlowMatrix installation available

Product Specifications

Height1220mm (4ft) 1830mm (6ft) – 2440mm (8ft)
Width and Depth305mm x 610mm
Sheet Spacing19mm
Thickness0.25mm
MaterialPVC

Related Cooling Tower Products